In The Repair Process Using Inflatable Jacks

1, place the air bag in the car chassis to ensure airbag paw base is in contact with the ground at the bottom;

2, connect the hose with a one-way valve, then the other end of the hose connected to the exhaust pipes;

3, all ready check whether your vehicle's Handbrake tension to ensure greater stability, start the vehicle and allow it to stay in the idle state;

4, vehicle starts, emissions of exhaust gas through the hose to the air bag, is in need of attention have staff on duty during airbag to prevent air bag due to paw base base shift and uneven ground contact and, if necessary, manually adjust the location to put the balloon.